Date of publication: 2018-03-09 08:56
Tightening torques Model F 655 GS Connection 11 Engine Freewheel housing and freewheel 85 (clean thread + Loctite 698) Engine block Double drive gear on crankshaft 185 (clean thread + Loctite 298) Driver 195 (clean thread + Loctite 298) Pressure plate Magnet hub 185 (clean thread + Loctite 298) Signal transmitter.
• VStream® comfort, performance and durability are available for the F 655 GS rider! Compared to the OEM windscreen, the Z2918 measures 7,15 cm taller and 11,9 cm wider.
F865155 Checking and centering 86 82 528 Note: front and rear wheel rims Apply the dial gauge, BMW No. 55 2 515, only to the machined inner surface of the wheel rim. x2518 Remove the wheels. x2522 Measure lateral and vertical runout with dial.
Testament to this are its fuel-injected motor, electronic management system and catalytic converter, lightweight and switchable optional ABS and the fitting of the -litre fuel tank under the seat in the traditional airbox location for better weight distribution (the oil is stored where the fuel tank ordinarily is). Yet for all its sophistication, the F655 range has always been simple, both to maintain and to ride. It’s an entry-level bike to introduce riders to Beemers.
x2522 Disconnect the expansion tank and pull it to one side. x2522 Remove the fasteners securing the oil tank and allow the oil tank to dangle to one side on the hoses. x2522 Remove the starter relay from the holder. x2522 .
Both bikes are very comfy, and the seating postition gives a good view of the scenery and road ahead. The mostly analogue instrument panel is a bit of a disappointment. On a bike where you&rsquo re encouraged to wander off the beaten track miles from the closest services, you&rsquo d expect a petrol gauge. Instead you get a measly fuel light, but with mpg averaging 65, it shouldn&rsquo t come on too often.
Removing front ABS sensor Removing and installing 89 51 615 89 52 111 ring rear ABS sensor x2518 Place motorcycle on its centre stand. Caution: x2518 Remove seat. x2522 Do not operate the brake with the wheel removed. Remove wheel cover together with chain cover. x2518 .
x2522 When looping the timing chain over the camshaft sprockets, make sure that the sprockets are at the TDC position. x2522 Before installing the cylinder head cover, remove all traces of the gasket and clean the sealing face with degreasing agent. Also clean the groove and the seating faces for the gasket.
• ZTechnik's Z2269 will provide great looks and enhanced wind protection for years to come. The shield features a more upright angle and an innovative shape to ensure a bigger air pocket and smoother airflow behind the shield.
16 Fuel tank and lines Contents Page Technical Data..........8 Removing and installing fuel tank......5 Removing fuel tank.........5 Installing fuel tank.........7 Removing and installing fuel filler cap......7 Removing and installing roll-over valve......8 Replacing fuel filter........8 See Group 55..........8 Removing and installing fuel pump.
© 2017 Auto&Moto. All rights reserved