Date of publication: 2018-04-13 20:58
Your vehicle x2519 s hood has two locations for the prop rod to be placed. These locations provide two different hood opening positions. Use the location which best suits your needs. 2556 Freestar (win) Owners Guide (post-2552-fmt) USA (fus)
Press the pad on the steering wheel to blow/sound the horn. The horn functions even when the ignition has been switched OFF.
Use the hazard warning lamp when your vehicle is stationary or to warn other road users to be cautious while passing your vehicle.
Even if the light turns ON and a short time later turns OFF, your tire pressure still needs to be checked. In short, once the light has turned ON, at least one tire may be underinflated. 2556 Freestar (win) Owners Guide (post-2552-fmt) USA (fus)
When driving through water, drive very slowly and at constant speed, less than 5 kmph. Water waves generated will be high and may enter air intake, causing severe engine damage or cause a vehicle to get stalled.
8B-9 Chapter 8 Part B Electrical system (XV755-1155 models) Instrument cluster (XV925 RH, XV925 RJ and TR1) Washer Speedometer Lower cover Lockwasher Screw Distance sensor Wiring Rubber damper Bulb Washer Wiring harness Collar Mounting bracket Bulb Grommet Lockwasher Tachometer Speedometer housing Tachometer housing Sealing ring.
Each accessory is made from high quality materials and meets Mahindra's rigid engineering and safety specifications. Every Mahindra accessory installed according to the Mahindra installation provisions comes with the respective accessory warranty.
Do not allow children to stand up or kneel on either the rear or the front seats. An unrestrained child could suffer serious injuries during emergency braking or collision.
The vehicle should be examined as soon as possible by an authorized Mahindra dealer. The Anti-lock brake system is not designed to shorten the stopping distance: Always drive at a moderate speed and maintain a safe distance from the vehicle in front of you. The stopping distance may be longer in the following cases:
To decrease speed, press and hold “SET -” button. The vehicle speed at the point of switch release will become the new descent speed.
© 2017 Auto&Moto. All rights reserved