Date of publication: 2017-10-29 10:57
Figures shown are for expected accumulated average mileage. Actual miles may differ substantially. Kelley Blue Book does not provide a dollar figure to add or deduct based on mileage for motorcycles. A motorcycle’s condition is far more important than its number of miles driven, since factors like riding style and road conditions will have a far greater impact on a value than the actual mileage.
ENGINE 8-58 OIL PUMP x2522 Before mounting the oil pump, apply engine oil to the sliding surfaces of the oil pump case, outer rotor, inner rotor, and crankcase. x2522 Apply a small quantity of THREAD LOCK x251C 1892 x251D or THREAD LOCK SUPER x251C 1822 x251D to the oil pump mounting screws, and then tighten them securely.
Pay attention to the following points: STEERING SHAFT x2522 Apply SUZUKI SUPER GREASE x251C A x251D to the O-ring, dust seals and steering shaft before remounting the steering shaft. ' 99555-25585: SUZUKI SUPER GREASE x251C A x251D (USA) 99555-25515: SUZUKI SUPER GREASE x251C A x251D (Others) x2522 .
About Suzuki LTZ955 Parts Shop the large inventory of motors, parts, and accessories, including ATV engines and components !
7-22 ELECTRICAL SYSTEM INDICATOR LIGHT POSITION Neutral indicator light BI/B & O/G Speedometer cover Water temp. Reverse indicator light indicator light BI/R & O/G BI/W & O/G Blue/White mark Blue/Red mark Blue/Black mark WIRE COLOR Bl/B: Blue with Black tracer Bl/W:Blue with White tracer Bl/R: Blue with Red tracer O/G: Orange with Green tracer.
SERVICING INFORMATION 8-25 TIGHTENING TORQUE ENGINE ITEM N xB7 m kgf-m lb-ft Cylinder head cover bolt Spark plug Cylinder head bolt (M15) (M6) Cylinder head side bolt Cylinder nut Camshaft journal holder bolt Balancer driven gear nut Primary drive gear nut Generator rotor nut.
GENERAL INFORMATION INFORMATION LABELS APPLIED SPECIFICATION LABEL or PLATE NAME E-58 E-28 E-88 xA1 xA1 x2519 Certification plate xA1 x2519 x2519 Information label xA1 xA1 xA1 Tire air pressure label xA1 x2519 x2519 Tire air pressure label and warning no-passenger label xA1 .
ENGINE 8-15 x2522 Remove the gearshift shaft 1 by removing the snap ring 2. x2522 Remove the gearshift pawl lifter 8 and gearshift cam driven gear 9. x2522 Remove the gearshift cam stopper arm 5. x2522 Remove the gearshift cam driven gear bolt. x2522 .
5-16 COOLING AND LUBRICATION SYSTEM x2522 Place a rag over the water pump. x2522 Remove the oil seal using a suitable bar. NOTE: If there is no abnormal condition, the oil seal removal is not nec- essary. The removed oil seal must be replaced with a new one. x2522 .
If you are having trouble getting spare parts, or if you have a technical question, the Louis Technical Centre has no end of experience, reference books and contacts.
© 2017 Auto&Moto. All rights reserved